new Slope Detector IV is the
latest in tip over warning
device technology. These guys
did not have one.
With the all new Slope Detector IV
level sensor mounted to the rear axle and the
control unit mounted in the cab, you will be
warned if there is an out of level condition
and the hoist will be shut down
Easy to program with just the turn of a key,
the system can be set to stop the hoist if the
trailer tips more than you preset the limit to.
The hoist can then be lowered and the trailer
repositioned to a level position. The operator
cannot override the setting once the key is
removed. The cab unit displays both lights and
warning sounds to alert the driver of unlevel
conditions even while looking in the rear view
mirror and backing up.
New PLC Technology
The sensor unit is attached to the rear axle and
the cab unit is mounted in the cab. The signal from the
sensor unit is resident in the truck's electrical system.
This eliminates the need for a plug between the tractor and
trailer. If each trailer and tractor of a fleet are fitted
with Slope Detectors, you can hook up any tractor with any trailer.
To download the installation instructions Click Here