Pulltarps Frequently Asked Questions
Pulltarps tarping systems are built for durability, reliability, and easy operation on dump trucks and trailers. Browse the FAQs below to find answers about installation, replacement tarps, and system compatibility—or explore our Pulltarps systems to find the right solution for your truck.
What kind of pulling force does it take to operate a Semi-Automatic Pulltarps System? +
Pulltarps’ semi-automatic tarp systems are easy to deploy, it only takes one pull. We made these systems so that any adult can operate the tarp system.
How can I choose the correct tarp size for my tarp system? +
The minimum tarp length needed on an automatic system is 3’ longer than the truck body. The minimum tarp length on a semi-automatic system is 2’ longer than the truck body, although, tarp lengths may exceed 5’ longer than the bed if the system housing is mounted above the rail.
Should I get a 4-spring arm kit or a single spring? +
Pulltarps makes 4- spring arm kits for applications on beds up to 22’; a single spring is needed for anything over 22’.
When is it recommended to get an electric arm system? +
We recommend an electric arm system for tarping peaked loads and for longer dump truck boxes. Pulltarps Semi-Automatic systems are easy to deploy and use, but they can only cover 28 feet of a truck bed; an automatic system from Pulltarps takes less time to cover a load and covers trucks up to 40 feet.
Do I need a bent arm kit? +
You may need bent arms if the arms and pivot points can potentially be in the way of containers and compactors or, if housing is not mounted level to the side rails.
To find our warranty information, check our Double Guarantee page. If you have any other questions that were not answered in this section, feel free to contact our customer service team via the chat or by calling (877) 426-9877.
1. Can I install this Pulltarps Tarping System myself or do I need to bring it to a Service Center?
If you need to have a Tarping System installed and don’t have the ability to do it on your own, you can use our
Locate A Service Center page locate an approved
Service Center in your area. We also provide detailed instructions and hotline telephone technical support so you can install the systems yourself or have your local truck repair or welding shop do it for you.
2. How hard is it to install a Tarping System?
That depends on your technical and mechanical abilities. Hard to install may have a different meaning for different people. Although there is nothing that is terribly complex about our tarping systems, we supply easy to follow instructions. We have found that most people who have difficulty installing the system did not read the instructions until they had a problem. Normally our systems take only a few hours to install.