Lifetime hardware warranty · 6 models · Made in California
Select one of our six semi-automatic systems according to the level of falling-debris protection desired and by bed length, ranging from open 16-foot to 40-foot truck bodies.
Strongest, most durable semi-automatic system
Heavy-Duty Protection · Up to 40ft
Max Bed
Welded Steel
Assisted
Our strongest, most durable semi-automatic system, its fully-welded 12-gauge steel construction offers the best protection from falling debris, and is designed for longer applications up to 40 feet. An external ratcheting spring adjustment lets you re-tension the spring in the field, so no disassembly is required.
Includes: Tarp Roller Tube · Welded Steel Housing · Arm Pivots · External Ratcheting Spring Adjuster · Spring Shaft Anchor
✓ Fully-welded 12-gauge steel housing
✓ External field spring tensioning
✓ Covers beds up to 40 feet
✓ Compatible w/ all 4 tarp materials
Welded-steel protection for shorter beds
Heavy-Duty Protection · Up to 18ft
Max Bed
Welded Steel
Assisted
With the same strong, durable build as the 9500M, our 8500M is sized for smaller dump bodies up to 18 feet. Its fully-welded 12-gauge steel gives you the best protection from falling debris, and a powder-coated finish guards against corrosion. Choose the 9500M for bodies up to 40 feet.
Includes: Tarp Roller Tube · Welded Steel Housing · Arm Pivots · Spring Shaft Anchor · Powder-Coated Finish
✓ Fully-welded 12-gauge steel housing
✓ Powder-coated for corrosion resistance
✓ Sized for beds up to 18 feet
✓ Compatible w/ all 4 tarp materials
Galvanized housing for falling-debris protection
Mid-Duty Protection · Up to 28ft
Max Bed
Housing
Assisted
Our Steel Protector + System holds 28 feet of tarp and works with all types of dump trucks. The galvanized housing protects the system from falling debris and loader contact for years of reliable operation. A steel bolt-in spring shaft anchor and mounting brackets are included, and the system covers you for all state laws and regulations.
Includes: Tarp Roller Tube · Galvanized Housing · Arm Pivots · Steel Bolt-In Spring Shaft Anchor · Mounting Brackets
✓ Galvanized debris housing
✓ Steel bolt-in spring shaft anchor
✓ Works with all dump body types
✓ Compatible w/ all 4 tarp materials
Galvanized housing for smaller dump bodies
Mid-Duty Protection · Up to 18ft
Max Bed
Housing
Assisted
Great for smaller dump bodies that still need some protection from falling debris, our Steel Protector™ (Semi-Automatic) System holds 18 feet of tarp and mounts against the cab shield so material rolls off the housing and into the box, instead of onto your tarp system.
Includes: Tarp Roller Tube · Galvanized Housing · Arm Pivots · Spring Shaft Anchor · Cab-Shield Mounting
✓ Galvanized steel housing
✓ Cab-shield mount sheds debris
✓ Sized for smaller dump bodies
✓ Compatible w/ all 4 tarp materials
Most economical semi-automatic system
Best Value · Up to 30ft
Max Bed
Frame
Assisted
Our most economical semi-automatic system, our Open 9000M System holds up to 30 feet of tarp and is for applications where falling debris and loader damage are not a concern. The open design has no housing, and it includes black powder-coated end plates and a steel bolt-in spring shaft anchor.
Includes: Tarp Roller Tube · Powder-Coated End Plates · Arm Pivots · Steel Bolt-In Spring Shaft Anchor
✓ Most economical semi-auto option
✓ Black powder-coated end plates
✓ Holds up to 30 feet of tarp
✓ Compatible w/ all 4 tarp materials
Most basic, least expensive system
Entry Level · Up to 16ft
Max Bed
Frame
Assisted
The Open 6000M System is our most basic and least expensive system, built for smaller dump trucks. The open design has no housing and holds up to 16 feet of tarp. The operator pulls the tarp out over the load with a pull rope, and it retracts on the spring tension stored in the roller.
Includes: Tarp Roller Tube · Open Frame · Arm Pivots · Pull Rope · Spring Shaft Anchor
✓ Lowest-cost semi-auto system
✓ Pull-rope deploy, spring retract
✓ Sized for smaller dump trucks
✓ Compatible w/ all 4 tarp materials
Not sure which model fits your truck? Use the configurator or call 1-800-368-3075.
![Black tarp roll with metal end cap and PULLTARPS branding visible at an angle.]](https://www.pulltarps.com/wp-content/uploads/2026/08/500X350_SuperShield9500M_CloseUp_2022_01-1.png "500X350_SuperShield9500M_CloseUp_2022_01 - Pulltarps Mfg - Pulltarps Mfg")
The configurator walks you through truck class, bed dimensions, and hauling material — then recommends the right semi-automatic system, the level of debris protection you need, and a compatible tarp. No electrical install, no guesswork.
Or call: 1-800-368-3075
All Pulltarps semi-automatic systems accept the same four tarp materials. Choose by hauling material, not by system.
Spring-assisted operation means there’s no motor to wire, no battery draw, and nothing to short out. Mount it, tension the spring, and go. It’s ideal for trucks without a 12V kit.
You get the same rugged Pulltarps hardware and tarp compatibility at a lower price than an automatic system. The Open 6000M and 9000M are our most economical ways to get a truck covered and compliant.
The operator deploys and retracts the tarp from the ground with a pull rope, so they never have to climb on the bed or step into traffic. Enjoy a safer crew and a faster turnaround than a hand cranked tarp.
Welded 12-gauge steel and galvanized housing options stand up to daily falling-debris punishment. Designed, machined, and assembled in the USA, with same-day parts shipping and a lifetime hardware warranty.
A semi-automatic tarp system uses a spring-loaded roller and a pull rope to cover a dump truck or trailer bed from the ground. The operator pulls the tarp out over the load, and the spring tension stored in the roller retracts it on the way back. There’s no electric motor and no in-cab switch, just spring assistance that does most of the work, so no one has to climb on the bed.
Automatic systems are electric and in-cab controlled — fastest to deploy, best for high-cycle Class 7–9 operations. Semi-automatic systems are spring-assisted and ground-operated with a pull rope — lower cost, no electrical install, and still no climbing. EZ-Fit kits are bolt-on solutions for smaller landscape and work trucks. See the full comparison.
No. Semi-automatic systems are entirely mechanical — spring tension does the work, so there’s no motor, no battery draw, and no 12V kit to install. That makes them a good fit for trucks where adding electrical isn’t practical or where you want the lowest-maintenance option.
When paired with a properly sized tarp, Pulltarps semi-automatic systems meet or exceed federal load-covering requirements and the load-covering rules in all 50 states. View state and federal tarping regulations.
Pick by falling-debris protection and bed length: the welded-steel SuperShield 9500M (up to 40ft) and 8500M (up to 18ft) for the harshest debris, the galvanized Steel Protector + (28ft) and Steel Protector (18ft) for balanced protection, and the open-frame Open 9000M (30ft) and 6000M (16ft) where debris isn’t a concern. Use the configurator to match a model to your exact truck.
